XBOX 360 Penny Fix

The XBOX 360 penny fix is a trick that requires the XBOX 360 to be stripped down to the motherboard. It is quite possible that you may not like to strip your precious gaming console. If you are unsure, you can check the net for a lot of options on how to do it properly. But if you have a warranty running, then it might not be the best idea always to try to repair it yourself. You might make mistakes which if they lead to more problems will have to be fixed by a professional. The charges of that professional will also be very high. So you have to keep in mind the cost incurred while going for an XBOX 360 penny fix.

There are other ways however in which you can have a proper XBOX 360 penny fix guide. In this case, you will have to follow all the steps to properly open your XBOX 360 to the motherboard. You have to sit with the motherboard rate in front of your eyes to begin your work on the XBOX 360 penny fix. The motherboard is the main circuit board of the console. Then after this, you have to get along a few items needed for the XBOX 360 penny fix. These items are a new roll of pennies, electrical glue and a roll of black tape. Then you start on the process of the XBOX 360 penny fix.

To go through this procedure, first you have to select two to three pennies. These pennies need to be piled on top of each other. They need to be covered completely by electrical tape. This should be done in such a manner that you cannot see any copper from the sides. You should go on doing this until you have four bunches of three pennies each. Use some hot glue to stick the bunch of stacked pennies to the RAM. There is another option besides hot glue which you can use in this case. You can also use women’s salon nail pads to help you get the desired effect. These are very reliable and they do not leave any particular mess around in the later time when you take away the pennies.

If you have used three stacked pennies for the screws, then do not screw the black screws to the CPU or GPU again. You should simply leave them off while you are putting the whole thing back together. After you do this, you should scroll the rest of the screws together slowly in and eventually tighten them up. You have to make sure that the metal casing holes are matched up correctly by the inputs. This is all you need to know for this method which has been proven and tested. It has worked for a lot of people and there is no reason why it shouldn’t work for you. If however, you feel you cannot still handle the console, then it is better to send it to the company for repair.

Penny fixes do not generally require sending the console to a repair company. Still if your XBOX has not been opened, then you should send it to Microsoft. This is because you will be getting their service for free. So it is better to send the XBOX for repair if you have not opened it and the warranty period is on.

Related posts:

1. How to fix XBOX 360 freezing? The XBOX 360 is a very amazing game console....
2. XBox 360 X Clamp Fix My xbox 360 recently tanked giving me an error different...
3. Solving XBOX Error 06 The XBOX 360 is a gift from Microsoft. When...
4. Solving XBOX Error 0110 The XBOX 360 is one of the world’s favorite...
5. Solving XBOX error 0022 The XBOX 360 has been known to have about...